Digital Yacht Antenna Bases - Complete Range

Digital Yacht Antenna Bases - Complete Range

Choose from the full range of Digital Yacht Antenna bases, to work with Digital Yacht products for yachts and sailing boats, with free delivery to the UK. 


Find the full range of Digital Yacht bases to be paired with antennas to fit on any position on your sailing boat of yacht. See details about each base here:


Flange mount (ZSHA4710)

KEY FEATURES

Sturdy stainless steel fixed deck base for mounting onto horizontal deck or surface. High flange mount with standard 1″x14 TPI thread.

SPECIFICATIONS

For GPS, Marine TV and VHF antennas.

Standard 1 in-14 thread.(male)

Low-profile

Stainless steel

Heavy duty


Rail mount (ZSHA4720)

KEY FEATURES

This rail mount comes with nylon adapters so it is able to fit vertical or horizontal, square or round rails with a 22/25/35mm diameter. For use with standard 1″x14 TPI thread antennas.

For use with 4G Connect and WL510 antenna, you need a 1″x14TPI to 1.25″ pipe thread adaptor.

SPECIFICATIONS

Can also be mounted to flat surfaces

Standard 1″-14 thread (male)


Nylon Ratchet Mount (ZSCOPA3)

KEY FEATURES

The handle of the nylon ratchet mount allows easy fold down of antenna and 4 way design allows for mounting on any surface. Suitable for use with KS30 or with any antennas using standard 1″x14 TPI thread. Cable from the antenna can be passed through the bracket to ensure watertight seal.

For use with 4GConnect and WL510 antenna, you need a 1″x14TPI to 1.25″ pipe thread adaptor.

SPECIFICATIONS

Standard 1 in-14 thread.(male)

Nylon

UV Resistant


Detachable rail mount bracket (ZSCOPA41)

KEY FEATURES

This detachable rail mount bracket is designed to fit 1″ rails. With its detachable top to therefore allow easy removal of an antenna. Ideal for use with any antennas which need to be stowed when sailing.

Chrome brass rail mount, quick and easy to install. It is ideal for installation on 20 mm to 25 mm horizontal rails.

It has a 1” x 14 standard thread (suits KS30, etc), detachable by unscrewing the thumb screw.

For use with 4GConnect and WL510 antenna, you need a 1″x14TPI to 1.25″ pipe thread adaptor.

SPECIFICATIONS

Detachable rail mount bracket

Fits horizontal rails (20 to 25mm)

1” x 14 standard thread

Easy to install and to detach


N280S – 1″x14TPI to 1.25″ pipe thread adaptor

KEY FEATURES

the 1×14″TPI to 1.25″ pipe thread adaptor fits to 1.25″ antennas and converts to fit 1″ range of mounts. For use with WL510 WiFi antenna and 4GConnect Pro.


Deck base for CX4A, WL510 or 4GConnect (ZCELE179F)

KEY FEATURES

Deck mounting bracket (P/No. ZCELE179F) that is supplied with our WL510 or 4G Connect Antenna.

It is also a useful accessory for any commercial VHF (CXA4), Wi-Fi or other marine Antenna that has the less common 1.25” Pipe Thread mount.

It mounts to any horizontal surface and allows these larger 1.25” antennas to bolt down onto this threaded fitting.

SPECIFICATIONS

Deck base for CX4A, WL510 or 4GConnect antennas

Fits to 1.25″ antenna

Stainless steel

Heavy duty construction


Mast Mount (ZSCOPA82)

KEY FEATURES

Stand off mast mount bracket for marine antenna. You can use with VHF antennas as well as DTV100 TV antenna and any antennas with standard 1″x14 TPI thread.

The base attaches to the mast with 4 screws. The mount has a passage in the center to allow cable through it.

For use with 4GConnect and WL510 antenna, you need a 1″x14TPI to 1.25″ pipe thread adaptor.

SPECIFICATIONS

23cm lenght

Standard 1 in-14 thread.(male)

Stainless steel


Mast/Rail Mount (ZCELN275F)

KEY FEATURES

Heavy duty mast or rail mounting bracket for installation of all our antennas with 1”-14 threaded base on vertical or horizontal pole. The mount is made from PU powder coated die-cast aluminium.

You can mount the bracket vertically overhead or alternatively on side of poles Ø 38 – 60 mm and horizontally on side beams Ø 30 – 60 mm. Moreover, there is the option to mount on a wall with screws (not supplied). Stainless steel hardware also included.

Ideal mount for commercial vessels with capability to affix to horizontal or vertical rails. 4G Connect Pro and WL510 antennas simply screw into top section. Also suits CX4A AIS tuned commercial antenna.

Finally, please note you should protect the connector using adhesive lined heat-shrink or self amalgamating tape.

SPECIFICATIONS

Mast or rail mounting bracket

Mounting on vertical or horizontal pole or rail with diameter Ø 38-60 mm

Optionally mounting on wall with screws (not supplied)

Supplied with U-bolts

Standard 1 in-14 thread

Diecast aluminium and stainless steel

Heavy duty construction


Stainless Steel Ratchet Mount (ZSHA4187D)

KEY FEATURES

Extra Heavy Duty Stainless Steel Ratchet Mount. Subsequently it is of great use wherever extra heavy-duty construction is needed.

For example, use with 4GConnect and WL510 antenna, you need a 1″x14TPI to 1.25″ pipe thread adaptor.

SPECIFICATIONS

Bolt holes: 5/16in dia., 3in x 1½in on center

Special cable slot thus eliminating removal of most factory-installed connectors

Standard 1 in-14 thread (male)

Stainless steel

Heavy duty construction


Product tabs

    £0.00
    £26.80
    Earn 0Reward points

    QTY

    Do you want to be notified when this product is back in stock? Complete the form below and we'll let you know when it is.


    Recommend this product

    Digital Yacht Antenna Bases - Complete Range