Sleipner Midi 202 Windlass
Buy the Sleipner Midi 202 600w 12v Windlass for sailing boats and yachts, with free delivery to the UK.
Midi 202 is a very compact anchor winch for internal mounting on transom or vertical bulkhead, hanging horizontally under the deck or dolly table. With free-fall system and gear housing, traction sheave and bracket in acid-proof steel.
Sleipner is Rebranding to Side Power
Side-Power or Sleipner Midi 202 is a further development of Midi 201 where a reconstructed cable and rope deflector that simplifies installation and adjustment of the winch during installation.
The mounting bracket on the Midi 202 can be rotated steplessly in relation to the winch's gear / motor. It can thus be mounted on surfaces that have different angles in relation to the transom. It can be mounted on the inside of the transom, hanging under the deck or on the stern of the transverse bulkhead inside the boat. This significantly simplifies installation.
Midi 202 is equipped with an end stop sensor that automatically stops the anchor at the flush level and then pulls the anchor at reduced speed and power to the parking level in the anchor roller.
Features
- A modern self-developed winch controller gives the anchor winch the following features and benefits:
- Easy programming for selection of anchor winch
- (Mini / Midi / Maxi / Maxi for chain).
- Multi-voltage 12V and 24V.
- Fully insulated circuit board with fixed poles for easy connection.
- PVM speed control (soft start and reduced speed after first stop).
- The traction force is reduced after the first end stop level (stress compensated).
- Easy connection of both series and permanent magnet motors.
- Protected against incorrect connection of + and - connection.
- Program / error code LEDs and end stop indicator ..
- The motor is protected against overheating and overload.
- The control unit has a temperature sensor.
- Safety relay that breaks in the event of a short circuit.
- Quick coupling splitter for panel and end stop transducers.
- Attachment points for the power cables
Specifications
| Assembly | Internal |
| Effect | 600 W |
| Weight (kg) | 12 |
| Voltage | 12 V |
| Traction | 200 kg |
| Max traction | 230 kg (block) |
| Traction speed | 20 m / min at 30 kg load |
| Max boat size | 25 ft / 7.6 m |
| End stop | Yes |
| Recommended fuse | 150 Amp - 12 V |
| Recommended anchor weight | 7.5 - 15 kg |
| Ankertau | 12 mm lead wire |
| Species. no. | 36-12108 |
Spare Parts also Available - see exploded diagram in pictures:
| # | Description | Product |
|---|---|---|
| 1 | MIDI Motor 600W | 12-06012 |
| 2 | MIDI Gear Leg | 14-00240 |
| 3 | Gear Leg Bracket | 14-00258 |
| 4 | MIDI Brake | 16-00240 |
| 5 | Rope guide, finger and sensor MIDI202 | SM158429 |
| 6 | MIDI Gypsy | 16-00244 |
| 7 | MIDI loose pack | 16-00243 |
Product tabs
Recommend this product